An enthusiast known online as @nagakurage has built a working retro PC around an Intel i486 DX2 processor on a breadboard, complete with a custom 3D-printed CRT-style enclosure, and had it running Doom by November 9, 2026. The project was documented in stages on social media, beginning with the acquisition of the CPU itself in late October.
On October 24, @nagakurage showed off the Intel i486 DX2 chip he had obtained. It was the DX2 66 model, which ran at 66 MHz internally and 33 MHz externally through a 2x multiplier. The gray chip was made in Malaysia and carries 168 pins.
The enthusiast then purchased a Colorlight i9 v7.2 FPGA board to attach the CPU to and to handle chipset duties. Every pin of the 486 CPU appears to have been connected separately to an experimental socket built using a baseboard.
Progress came quickly after that. On October 26, the finished form of the breadboard system began to take shape, and the developer got the CPU to blink an LED using x86 code. RAM was added on October 31 and adjusted until it was error-free, and microSD storage was added on November 3. That same day, @nagakurage saw the breadboard 486 boot FreeDOS 1.3 for the first time.
The developer then turned to 3D printing, using a Bambu Lab A1 mini to produce the parts for a custom CRT-style enclosure. The enclosure was designed by Claude and assembled with a 5-inch 800×480 Elecrow Raspberry Pi panel inside.
On November 9, @nagakurage showed the breadboard PC alongside the era-matching beige-shelled monitor and powered the system up. The seminal shooter ran smoothly enough on the vintage 1992 silicon.
Going forward, the enthusiast wants to refine the breadboard-based project and make it fully PC-98 compatible, in line with the dominant NEC PC-9800 series in Japan in the early 90s. Tom's Hardware reported in April on another retro computing enthusiast and a breadboard-based Intel 386 system build.
More software news from TechManNews.






